4ft Stainless Steel Braided Hose w/ -10AN Fittings
Light and flexible, the Mishimoto'stainless Steel Braided Hose is the perfect complement to your oil cooling system and engine bay.The stainless steel construction not only adds to the look of your engine bay, but also prevents corrosion and abrasion.Each light weight hose comes pre-assembled with one 90 degree swivel -10AN fitting and one straight swivel -10AN fitting.With an operating temperature range from -40 degrees F to +300 degrees F and a maximum PSI of 750PSI, you can trust that this hose can wIt'stand the high temperatures that come with performance vehicles, on or off the track.The Mishimoto'stainless Steel Braided Hose can also be used for fuel, oil, vacuum, and water line applications, and is covered by a Lifetime Warranty.
Light and flexible, the Mishimoto'stainless Steel Braided Hose is the perfect complement to your oil cooling system and engine bay.The stainless steel construction not only adds to the look of your engine bay, but also prevents corrosion and abrasion.Each light weight hose comes pre-assembled with one 90 degree swivel -10AN fitting and one straight swivel -10AN fitting.With an operating temperature range from -40 degrees F to +300 degrees F and a maximum PSI of 750PSI, you can trust that this hose can wIt'stand the high temperatures that come with performance vehicles, on or off the track.The Mishimoto'stainless Steel Braided Hose can also be used for fuel, oil, vacuum, and water line applications, and is covered by a Lifetime Warranty.
- Stainless steel braided hose resists corrosion and abrasion
- Hose comes pre-assembled
- Operating temperature range from -40F to 300F
- Max pressure of 750PSI
- Can be used for fuel, oil, vacuum, and water lines
- Mishimoto Lifetime Warranty
Information:
Aw/ -10AN Fittings| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | CN |
| End 1 Type | -10AN |
| End 2 Type | -10AN |
| Grade Type | Performance |
| Hazardous Material Code | N |
| Install Difficulty | 2 |
| Length | 48 |
| Life Cycle Status Code | Available to Order |
| Material | Stainless Steel Braid |
| Maximum Pressure | 1000 |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| SellingPoint01 | Stainless steel braided hose resists corrosion and abrasion |
| SellingPoint02 | Hose comes pre-assembled |
| SellingPoint03 | Operating temperature range from -40F to 300F |
| SellingPoint04 | Max pressure of 750PSI |
| SellingPoint05 | Can be used for fuel, oil, vacuum, and water lines |
| SellingPoint06 | Mishimoto Lifetime Warranty |
| SellingPoint07 | N/A |
| SellingPoint08 | N/A |
| SellingPoint09 | N/A |
| SellingPoint1 | Stainless steel braided hose resists corrosion and abrasion |
| SellingPoint10 | N/A |
| SellingPoint11 | N/A |
| SellingPoint12 | N/A |
| SellingPoint13 | N/A |
| SellingPoint14 | N/A |
| SellingPoint15 | N/A |
| SellingPoint2 | Hose comes pre-assembled |
| SellingPoint3 | Operating temperature range from -40F to 300F |
| SellingPoint4 | Max pressure of 750PSI |
| SellingPoint5 | Can be used for fuel, oil, vacuum, and water lines |
| SellingPoint6 | Mishimoto Lifetime Warranty |
| SellingPoint7 | N/A |
| SellingPoint8 | N/A |
| SellingPoint9 | N/A |
| TechSpec Compatible Fluids | Petroleum-Based Fuels--Engine Oil--Engine Coolant |
| TechSpec Fitting Angle | N/A |
| TechSpec Inlet | -10AN |
| TechSpec Inner Material | CPE |
| TechSpec Max Fluid Pressure (PSI) | Stainlees Steel 750, Nylon 1001 |
| TechSpec MaxFluidTemperature (F) | 300 |
| TechSpec Note | N/A |
| TechSpec Outlet | -10AN |
| TechSpec PurchaseIncludes | Fully assembled Stainless Steel Braided Hose w/ -10AN Fittings--Mishimoto Lifetime Warranty |
| Type | Stainless Steel |
| Universal Or Specific Fit | Universal |
| GTIN | 00748354810394 |