Mishimoto High-Pressure 1.3 Bar Radiator Cap Large
Getting the most out of your performance parts comes down to the details.When faced with hard driving conditions, a vehicle's cooling system becomes highly pressurized.OEM caps are not equipped to handle higher pressure, causing fluid to leak out into the overflow reservoir.The Mishimoto radiator cap is rated at a higher pressure and will keep coolant where it needs to be-flowing within the system.Rated at 1.3 Bar (19lbs) pressure.Fits most domestic vehicles.
- 1.3 bar (19 psi) high-pressure radiator cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system
- Ergonomically designed for easy removal and installation
- Performance Aluminum
- Radiators that require large radiator cap
- Fits most domestic vehicles
- Mishimoto Lifetime Warranty
Information:
Cap Large
Application Summary:
| Year |
Make/Model |
| Universal |
Fitment |
| Attributes |
| Attachment Type |
Twist |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Black |
| Coolant Recovery System |
No |
| Country of Origin (Primary) |
CN |
| Filler Neck Inside Diameter |
42 |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708917550 |
| Hazardous Material Code |
N |
| Indicator Markings |
No |
| Install Difficulty |
1 |
| Installation Difficulty |
1, 1 |
| Lever Type |
No |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminum |
| Maximum Pressure |
19 |
| NAFTA Preference Criterion Code |
B |
| Quick Pressure Release |
No |
| SDR Required Flag |
N |
| SellingPoint01 |
1.3 bar (19 psi) high-pressure radiator cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system |
| SellingPoint02 |
Ergonomically designed for easy removal and installation |
| SellingPoint03 |
N/A |
| SellingPoint04 |
Performance Aluminum |
| SellingPoint05 |
Radiators that require large radiator cap |
| SellingPoint06 |
Fits most domestic vehicles |
| SellingPoint07 |
Mishimoto Lifetime Warranty |
| SellingPoint08 |
N/A |
| SellingPoint09 |
N/A |
| SellingPoint1 |
1.3 bar (19 psi) high-pressure radiator cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system |
| SellingPoint10 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| SellingPoint2 |
Ergonomically designed for easy removal and installation |
| SellingPoint3 |
N/A |
| SellingPoint4 |
Performance Aluminum |
| SellingPoint5 |
Radiators that require large radiator cap |
| SellingPoint6 |
Fits most domestic vehicles |
| SellingPoint7 |
Mishimoto Lifetime Warranty |
| SellingPoint8 |
N/A |
| SellingPoint9 |
N/A |
| TechSpec Applications |
42mm Fill Necks |
| TechSpec Diameter (Inches) |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Includes |
N/A |
| TechSpec Installation Notes |
N/A |
| TechSpec Length (Inches) |
N/A |
| TechSpec Material |
N/A |
| TechSpec Maximum Pressure (PSI) |
19 |
| TechSpec Maximum Temperature (F) |
N/A |
| TechSpec Minimum Yield Strength |
N/A |
| TechSpec Note |
Ensure that you measure your radiator fill neck for proper cap fitment; locate the circular opening on top of your radiator. Clean the area, then measure the diameter (in millimeters) using a ruler or caliper. Compare this measurement to radiator cap sizes to select the correct fit. |
| TechSpec Overall Height (Inches) |
N/A |
| TechSpec Thread Size |
N/A |
| TechSpec Ultimate Tensile Strength |
N/A |
| TechSpec Weight (Ounces) |
N/A |
| Type |
Type A |
| Vented |
No |
| GTIN |
00748354797848 |
