Mishimoto M22 Oil Sandwich Plate
This Mishimoto Oil Sandwich Plate is a lightweight, high-flow sandwich plate that's built from 6061 aluminum. It's used to add an external cooler to your vehicles oil system. This Oil Sandwich Plate is designed specifically for M22 Stainless Steel Center Bolts and includes two 1/8in NPT plugged ports for optional sensors or gauges as well as our Mishimoto Lifetime Warranty.
This Mishimoto Oil Sandwich Plate is a lightweight, high-flow sandwich plate that's built from 6061 aluminum. It's used to add an external cooler to your vehicles oil system. This Oil Sandwich Plate is designed specifically for M22 Stainless Steel Center Bolts and includes two 1/8in NPT plugged ports for optional sensors or gauges as well as our Mishimoto Lifetime Warranty.
- Fits the 2010-2012 Hyundai Genesis Turbo
- Optimal core design for maximum cooling efficiency with minimal pressure drop
- Rated to 500 whp
- Includes all necessary couplers, brackets, and accessories
| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Black, Silver |
| Country of Origin (Primary) | CN |
| Feature Bullet 1 | Fits the 2010-2012 Hyundai Genesis Turbo |
| Feature Bullet 2 | Optimal core design for maximum cooling efficiency with minimal pressure drop |
| Feature Bullet 3 | Rated to 500 whp |
| Feature Bullet 4 | Includes all necessary couplers, brackets, and accessories |
| Gasket Or Seal Included | Yes |
| Hazardous Material Code | N |
| Install Difficulty | 2 |
| Installation Difficulty | 1 |
| Life Cycle Status Code | Available to Order |
| Material | Aluminum, 6061 Aluminum |
| NAFTA Preference Criterion Code | B |
| Port Quantity | 2 |
| SDR Required Flag | N |
| SellingPoint01 | CNC-Machined 6061 Aluminum |
| SellingPoint02 | Two 1/8-in NPT Ports (with plug) for sensors/oil feed/etc. |
| SellingPoint03 | Square O-ring design |
| SellingPoint04 | Mishimoto Lifetime Warranty |
| SellingPoint05 | N/A |
| SellingPoint06 | N/A |
| SellingPoint07 | N/A |
| SellingPoint08 | N/A |
| SellingPoint09 | N/A |
| SellingPoint1 | CNC-Machined 6061 Aluminum |
| SellingPoint10 | N/A |
| SellingPoint11 | N/A |
| SellingPoint12 | N/A |
| SellingPoint13 | N/A |
| SellingPoint14 | N/A |
| SellingPoint15 | N/A |
| SellingPoint2 | Two 1/8-in NPT Ports (with plug) for sensors/oil feed/etc. |
| SellingPoint3 | Square O-ring design |
| SellingPoint4 | Mishimoto Lifetime Warranty |
| SellingPoint5 | N/A |
| SellingPoint6 | N/A |
| SellingPoint7 | N/A |
| SellingPoint8 | N/A |
| SellingPoint9 | N/A |
| TechSpec Applications | N/A |
| TechSpec Caution | It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
| TechSpec Chassis Codes | N/A |
| TechSpec Core Construction | N/A |
| TechSpec Core Height (in) | N/A |
| TechSpec Core Length (in) | N/A |
| TechSpec Core Thickness (in) | N/A |
| TechSpec Engine Codes | N/A |
| TechSpec Fluid Capacity (qts) | N/A |
| TechSpec Includes | Oil Sandwich Plate--Rubber O-ring--Black 1/8-in NPT Plugs--Mishimoto Lifetime Warranty |
| TechSpec Inlet | N/A |
| TechSpec Installation Notes | N/A |
| TechSpec Note | This sandwich plate was designed to only be used with an M22 Sandwich Plate Adapter |
| TechSpec Outlet | N/A |
| TechSpec Overall Height (in) | 3.15 |
| TechSpec Overall Length (in) | 2.83 |
| TechSpec Overall Width (in) | 1.24 |
| TechSpec Rows | N/A |
| Thickness | 1 |
| GTIN | 00748354030198 |