Oil Cooler Kit, fits Jeep Wrangler JK 2007-2011
Your high-performance JK demands a cooling solution that can keep up in the most extreme environments.Whether you are cruising through the dunes or hitting the trails, properly regulated oil temperatures are vital to the life of your engine.Excessive temperatures result in rapid oil degradation and can put a quick end to a fun day in your rig.Mishimoto has the perfect solution for controlling oil temperatures in the Jeep JK direct-fit oil cooler kit.This kit utilizes precision-engineered JK-specific mounting brackets, pre-made stainless steel lines, oil filter sandwich plate, and all hardware necessary for a quick and easy installation.The Mishimoto Jeep JK oil cooler kit adds .65 qt to your oil capacity and reduces temperatures by up to 40 degrees while maintaining minimal pressure drop.This kit is a perfect complement to the Mishimoto Jeep JK transmission cooler kit and the Mishimoto all-aluminum radiator for the ultimate cooling solution for your Jeep JK.As with all our products, this kit includes the Mishimoto lifetime warranty.
  • Direct fit for the 2007?2011 Jeep Wrangler JK
  • Reduces oil temperatures by up to 40?F
  • Application-specific mounting brackets
  • Increases oil capacity by .75 qt
  • Mishimoto Lifetime Warranty

Information:

Jeep Kit, Black

Application Summary:

Year Make/Model
2007-2011 Jeep Wrangler
Attributes
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Color Black, Black
Core Color Black
Core Height 5.43
Core Thickness 1.97
Core Type Bar-and-Plate
Core Width 11
Country of Origin (Primary) CN
Finish Anodized
Grade Type Performance
Harmonized Tariff Code (Schedule B) 8708998180
Hazardous Material Code N
Inlet Fitting Gender Male
Inlet Fitting Type AN Flare
Install Difficulty 3
Life Cycle Status Code Available to Order
Material Aluminum
NAFTA Preference Criterion Code B
OptionLabel Black Cooler, Non-Thermostatic
Outlet Fitting Gender Male
Outlet Fitting Type AN Flare
SDR Required Flag N
SellingPoint01 Direct fit for the 2007-2011 Jeep Wrangler JK, Direct fit for the 2001-2005 Subaru WRX and STI
SellingPoint02 Application-specific mounting brackets
SellingPoint03 Premade braided stainless steel oil lines with durable -AN fittings
SellingPoint04 Billet aluminum oil sandwich plate in standard or thermostatic form
SellingPoint05 19-row stacked-plate oil cooler for optimal fluid temperature reduction, 10-row stacked-plate oil cooler for optimal fluid temperature reduction
SellingPoint06 Reduces oil temperatures by up to 40-degrees, Easily installs in two hours or less
SellingPoint07 Compatible with all Mishimoto JK Wrangler parts, Reduces oil temperatures by 20 F (16 C)
SellingPoint08 Increases oil capacity by 0.75 qt, Compatible with all Mishimoto Subaru products
SellingPoint09 Mishimoto Lifetime Warranty, Increases oil capacity by .5 qt
SellingPoint1 Direct fit for the 2001-2005 Subaru WRX and STI
SellingPoint10 N/A, This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit
SellingPoint11 N/A, Mishimoto Lifetime Warranty
SellingPoint12 N/A
SellingPoint13 N/A
SellingPoint14 N/A
SellingPoint15 N/A
SellingPoint2 Application-specific mounting brackets
SellingPoint3 Premade braided stainless steel oil lines with durable -AN fittings
SellingPoint4 Billet aluminum oil sandwich plate in standard or thermostatic form
SellingPoint5 10-row stacked-plate oil cooler for optimal fluid temperature reduction
SellingPoint6 Easily installs in two hours or less
SellingPoint7 Reduces oil temperatures by 20 F (16 C)
SellingPoint8 Compatible with all Mishimoto Subaru products
SellingPoint9 Increases oil capacity by .5 qt
TechSpec Applications 2007-2011 Jeep Wrangler--2007-2011 Jeep Wrangler Unlimited, 2007-2011 Jeep Wrangler--2007-2011 Jeep Wrangler Unlimited
TechSpec Caution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team., It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team.
TechSpec Chassis Codes JK, JK
TechSpec Core Construction N/A, N/A
TechSpec Core Height (in) 5.43, 5.43
TechSpec Core Length (in) 11, 11
TechSpec Core Thickness (in) 1.97, 1.97
TechSpec Engine Codes EGH, EGH
TechSpec Fluid Capacity (qts) N/A, N/A
TechSpec Includes Application Specific Mounting Brackets--19-Row Oil Cooler--2-ft 8-in Stainless Steel Braided Hose w/ -10AN Fittings--M20 Sandwich Plate--Stainless Steel Sandwich Plate Adapter, 3/4-in -16--Banjo Fitting w/ Bolt M20 x -10AN, Black--1/8-in NPT Plugs--Large O-ring--Mounting Hardware Set--Mishimoto Lifetime Warranty, Application Specific Mounting Brackets--19-Row Oil Cooler--2-ft 8-in Stainless Steel Braided Hose w/ -10AN Fittings--M20 Sandwich Plate--Stainless Steel Sandwich Plate Adapter, 3/4-in -16--Banjo Fitting w/ Bolt M20 x -10AN, Black--1/8-in NPT Plugs--Large O-ring--Mounting Hardware Set--Mishimoto Lifetime Warranty
TechSpec Inlet N/A, N/A
TechSpec Installation Notes Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb, Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb
TechSpec Note This kit comes with MMOP-SPTR, our sandwich plate with rear-mounted thermostat. Mishimoto does not recommend using MMOP-SPT due to suspension clearance issues.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb----It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team., This kit comes with MMOP-SPTR, our sandwich plate with rear-mounted thermostat. Mishimoto does not recommend using MMOP-SPT due to suspension clearance issues.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb----It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team.
TechSpec Outlet N/A, N/A
TechSpec Overall Height (in) N/A, N/A
TechSpec Overall Length (in) N/A, N/A
TechSpec Overall Length (in) N/A
TechSpec Overall Width (in) N/A, N/A
TechSpec Rows 19, 19
GTIN 00748354009521

Write a review.

Note: HTML is not translated.
    Bad           Good