Oil Cooler Kit, fits Honda S2000 2000-2009
Whether you are carving corners with the top down or blasting down the drag strip, your high-revving S2000 needs a reliable and effective cooling system.Mishimoto is proud to release an all-new, direct-fit oil cooler kit engineered and designed specifically for the AP1 and AP2 Honda S2000.This kit utilizes a large 19-row oil cooler mounted in the front grill for optimum airflow and cooling capability.It includes preassembled stainless steel lines and S2000-specific mounting brackets for a painless and clean installation.The Mishimoto oil cooler kit increases overall oil capacity by .6 qt and significantly reduces temperatures while maintaining minimal pressure drop.This kit is available with a thermostatic sandwich plate for additional oil-temperature control, and your choice of a stealth black or silver cooler.As with all our products, this kit includes the Mishimoto lifetime warranty.
- Direct fit for 2000-2009 Honda S2000
- Oil cooler kit retains the use of your stock liquid to liquid oil cooler unit
- Minimal pressure loss with dramatic temperature drop
- Thermostatic oil sandwich plate allows oil to reach optimum temperature
- Mishimoto Lifetime Warranty
Information:
Honda Kit, Black
Application Summary:
| Year |
Make/Model |
| 2000-2009 |
Honda S2000 |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color |
Black, Black |
| Core Color |
Black |
| Core Height |
5.43 |
| Core Thickness |
1.97 |
| Core Type |
Bar-and-Plate |
| Core Width |
11 |
| Country of Origin (Primary) |
CN |
| Finish |
Anodized |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708998180 |
| Hazardous Material Code |
N |
| Inlet Fitting Gender |
Male |
| Inlet Fitting Type |
AN Flare |
| Install Difficulty |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminum |
| NAFTA Preference Criterion Code |
B |
| OptionLabel |
Black Cooler, Thermostatic |
| Outlet Fitting Gender |
Male |
| Outlet Fitting Type |
AN Flare |
| SDR Required Flag |
N |
| SellingPoint01 |
Dramatic temperature drop |
| SellingPoint02 |
Minimal pressure loss |
| SellingPoint03 |
Direct fit for the Honda S2000 |
| SellingPoint04 |
Thermostatic option available |
| SellingPoint05 |
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit |
| SellingPoint06 |
Stealth black and sleek silver cooler options |
| SellingPoint07 |
Lifetime Warranty |
| SellingPoint08 |
N/A |
| SellingPoint09 |
N/A |
| SellingPoint1 |
Dramatic temperature drop |
| SellingPoint10 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| SellingPoint2 |
Minimal pressure loss |
| SellingPoint3 |
Direct fit for the Honda S2000 |
| SellingPoint4 |
Thermostatic option available |
| SellingPoint5 |
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit |
| SellingPoint6 |
Stealth black and sleek silver cooler options |
| SellingPoint7 |
Lifetime Warranty |
| SellingPoint8 |
N/A |
| SellingPoint9 |
N/A |
| TechSpec Applications |
N/A |
| TechSpec Caution |
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
| TechSpec Chassis Codes |
AP1--AP2 |
| TechSpec Core Construction |
N/A |
| TechSpec Core Height (in) |
5.43 |
| TechSpec Core Length (in) |
11 |
| TechSpec Core Thickness (in) |
1.97 |
| TechSpec Engine Codes |
F20C--F22C |
| TechSpec Fluid Capacity (qts) |
N/A |
| TechSpec Includes |
Application Specific Mounting Brackets--19-Row Oil Cooler--2ft, 11in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings--3ft, 8in Stainless Steel Braided Hose with 45 Degree and 150 Degree -10AN Fittings--M20 Thermostatic Sandwich Plate--M20 Stainless Steel Sandwich Plate Adapter--M20 x -10AN Straight Fittings--Mounting Hardware Set--Mishimoto Lifetime Warranty |
| TechSpec Inlet |
N/A |
| TechSpec Installation Notes |
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
| TechSpec Note |
AP1 S2000 vehicles will require minor bending of A/C lines for cooler and bracket installation. |
| TechSpec Outlet |
N/A |
| TechSpec Overall Height (in) |
N/A |
| TechSpec Overall Length (in) |
N/A |
| TechSpec Overall Length (in) |
N/A |
| TechSpec Overall Width (in) |
N/A |
| TechSpec Rows |
19 |
| GTIN |
00748666008649 |
